PEKERWOOD Hot Melt Wood Repair is a professional fast-setting solution for repairing knots, cracks, chips, edge damage and other local defects in solid wood, furniture components and joinery.

The synthetic-polymer hot melt has low shrinkage and can be trimmed with a sharp knife or chisel after cooling, then sanded to a fine finish. The repaired surface is suitable for subsequent oil or varnish finishing after normal preparation and a suitability test on the actual timber.

Key characteristics

• Designed for wood repair and knot filling

• Fast setting and easy to trim

• Low shrinkage

• Can be sanded after cooling

• Suitable for subsequent oil and varnish finishes

• 12 mm stick format

• Recommended application temperature: 160-215 °C

• Approximate open time: 20 seconds

• Heat resistance: approximately 105 °C

Available colour range

Amber, Beige, Black, Cola, Cream, Oak, Beech, Larch, Pine, Grey, Brown, White, Yellow, Mahogany, Ivory, Light Beige and Light Brown.

Colour appearance can vary depending on the wood species, sanding and final finish. For visible repairs, test the selected colour together with the planned oil, stain or varnish before production use.

Typical applications

Knot filling, cracks and small voids in timber, furniture component repairs, joinery defects and local edge damage. This system is intended for local wood-surface repairs and is not a substitute for structural repair.

For product selection, send PEKERWOOD a photo of the defect, timber type, preferred colour and intended final finish.