Solvent-free B-component for selected OLI-NATURA 2-component oil systems. It accelerates curing, improves chemical and mechanical resistance, strengthens oil anchoring in the wood and supports even pigment fixation in coloured oils.

Where can I use it?

• OLI-NATURA Worktop Oil and Colour Oil at a 5:1 oil-to-Hardener ratio

• OLI-NATURA HS Profiöl and compatible systems at the manufacturer's specified ratio, commonly 10:1

• Heavily used floors, stairs, worktops and furniture

• Fine-sanded wood and wood-and-epoxy surfaces where faster curing or greater resistance is required

How much do I need?

• 100 ml Hardener is the correct amount for 0.5 L Worktop Oil or Colour Oil at 5:1.

• 100 ml Hardener can be used with 1 L HS Profiöl at 10:1 when this ratio is specified for the oil.

How to use it

1. Stir or shake both oil and Hardener before measuring.

2. Add the Hardener immediately before application and mix thoroughly until homogeneous.

3. Apply the mixture straight away and use it within approximately 2–3 hours.

4. Do not return mixed material to the original oil or Hardener container.

5. Work at approximately 20°C with good air circulation; do not use below +15°C.

Good to know

VOC-free and not classified as dangerous goods for transport. Shelf life is approximately 6 months in the unopened, tightly closed original container when stored cool and dry.

Safety

Contains isocyanates. May cause an allergic skin reaction, may be harmful if inhaled and may irritate the respiratory tract. Keep out of reach of children. Avoid breathing vapour or aerosol, use protective gloves and eye protection, and provide good ventilation. Always follow the container label and safety data sheet.